No problem figured it out. Thanks for the right direction push though.. ' Use the Profile Explorer to find the Windows ProgID of the driver. ' I am using the...
29935
Timothy P. Long
t_p_long
May 17, 2013 1:39 am
I think the O.P. was having issues with COM registration, not the ASCOM Profile registration. That is indeed a subject I struggled with for a long time too,...
29936
freestar8n
May 17, 2013 6:21 am
Hi- Yes I did find those resources and I did get the Inno tool to do something that looked about right. I assume I was very close to having it all work but it...
29937
Chris Rowland
scope_sapiens
May 17, 2013 7:02 am
My understanding is that we do not want people to use the registry directly for things such as ASCOM registration and reading and writing the profile data. We...
29938
freestar8n
May 17, 2013 7:47 am
Hi Chris- I didn't mean to imply I wanted to muck with the registry - but I did want an understanding of what was going on to help diagnose problems and figure...
29939
Bob Denny
dc3dreamer
May 17, 2013 3:06 pm
You mentioned XML ... that came in with Platform 5 four years ago and went away with Platform 6 two years ago. But Chris is right, just use the provided tool ...
29940
mik.schuster
May 17, 2013 5:10 pm
Hi, I am new to ASCOM, C# and VS2012 and looking for help on project setup. I want to write a simple temperature compensation utility for my FLI Atlas focuser....
29941
Rick Burke
astromanrick
May 17, 2013 5:20 pm
Mike, You have figured out that you need to add references to those external assemblies (DLLs) that contain objects that you want to instantiate in your...
29942
mik.schuster
May 17, 2013 5:51 pm
Thank you Rick for your quick reply, adding items from Platform6 solved my problem. The focuser part of ClientToolkitSample.cs now works fine. Mike...
29943
Rick Burke
astromanrick
May 17, 2013 5:53 pm
Mike, I'm glad that I could help. Rick Burke...
29944
freestar8n
May 18, 2013 9:30 am
Hi- I definitely don't claim to understand this stuff, so if it is in fact easy to make a C++ driver, I would welcome such an example to refer to. As for xml -...
29945
Chris Rowland
scope_sapiens
May 18, 2013 11:16 am
... No it is not easy to make a C++ driver. This is part of the reason there are no examples. ... Who knows? If they are related to ASCOM platform 5 and you...
29946
Timothy P. Long
t_p_long
May 18, 2013 10:37 pm
... You know, the ultimate source of answers to all such questions is the source code. You could always check it out from sourceforge.net and take a look at...
29947
Chris
scope_sapiens
May 19, 2013 9:46 am
I've fixed the MoveAxis Issue in POTH, it will be in SP2. The TrackingRates exception with EQASCOM simulator is the same with EQASCOM simulator without going...
29948
unievaspravda
May 19, 2013 5:52 pm
Hi there, I am looking for developers who would want to write an ascom driver which could control the skywatcher's AZ mounts like this one: ...
29949
robin_m101
May 20, 2013 10:12 am
I have a problem with a dome driver that I've written that hopefully someone can shed some light on. Briefly, I have written a driver for my dome that works...
29950
screech_james
May 20, 2013 10:12 am
Hi, I'm looking at developing a computerised focuser based in the StepperBee stepper motor controller starter pack ...
29951
Chris
scope_sapiens
May 20, 2013 10:47 am
There's a lot of information on developing drivers that's included with the developer download of the platform. There are templates for VB and C# that provide...
29952
mik.schuster
May 20, 2013 5:01 pm
Just a note of thanks, I completed my implementation, the ASCOM focuser API and the FLI ASCOM Focuser driver so far work well and have been easy to use. A am...
29953
richard accomando
shyloh89
May 20, 2013 5:42 pm
I have installed Pempro along with .Net 3.5 and ASCOM 6.0. Pempro doesn't respond well so I checked to be sure ASCOM 6 was installed. And it was. But when I...
29954
Rick Burke
astromanrick
May 20, 2013 6:06 pm
Richard, If your PC is running Windows 7, or probably Windows 8) then you already have .NET 3.5 SP1 installed, but you must turn it on via Programs and ...
29955
steve.loveridge
May 20, 2013 9:03 pm
Robin has kindly offered to help me by producing a dome driver for my Pulsar dome, and he's done a brilliant job, but we're both pretty well stumped by this. ...
29956
Chris
scope_sapiens
May 20, 2013 9:35 pm
Several things to try: Try to log all the communication that you can - the serial commands from EQMOD to the mount motors, the traffic between POTH and EQMOD,...
29957
Timothy P. Long
t_p_long
2:42 am
Adding to Chris' rock solid suggestions, this is such a crazy sounding problem that I'm tempted to offer some fairly far out suggestions. My gut reaction is...
29958
Timothy P. Long
t_p_long
3:11 am
Mike, don't forget to validate your driver using Conform.exe. The ClickOnce install may well trip you up as soon as you try to install on a different computer....
29959
mik.schuster
4:58 am
Tim, thanks it's not a driver, just a client app. ClickOnce does have limits, but maybe its OK for a simple client .exe. I do need to double check on another...
29960
steve.loveridge
6:52 am
Thanks for your reply Chris. I didn't mention that the problem doesn't happen when using a dome or a scope simulator - so having slept on it, I guess that...
29961
steve.loveridge
6:55 am
Hi Tim Thanks for your help with this. I'm to get my hands on a different laptop and try a fresh install of ascom, Eqmod, poth and pipe. I'm away from home...
29962
robin_m101
11:12 am
Thank you all for the replies.You have confirmed my thoughts that there is no way that the dome driver should be interacting with eqmod. I'm going to do a...
29963
Timothy P. Long
t_p_long
2:14 pm
Oh, in that case I apologise for getting the wrong end of the stick, sometimes I read posts in a bit of a hurry and don't have time to read all the back story....
