Hi Marty I am getting an unhandled exception when I run the program. The error message says "Could not find a part of the path 'C:\Windows\Temp\_XGpcb.rul" I...
1723
martyflick@...
martyflick...
May 1, 2012 12:59 pm
First, make sure you have installed v1.21 (because v1.2 had a bug that would cause this exact behavior). Second, is your Windows system installed to a drive...
1724
Mark Stockburger
mstocky2
May 1, 2012 1:54 pm
Didn't have the Temp directory. Thanks it now works....
1725
martyflick@...
martyflick...
May 1, 2012 2:23 pm
Version 1.3 of my PCB verification tool is now available for download. It fixes a few bugs that have been reported recently: * Supports systems with Windows...
1726
Scott
szastoupil
May 10, 2012 2:16 am
Hi Marty. I started playing around with the DRC and verification checker. I'm not in agreement with the Verification errors being flagged. It says grounds...
1727
Scott
szastoupil
May 10, 2012 2:16 am
I forgot to add that I'm using the GUI version 1.3....
1728
martyflickinger
May 11, 2012 2:36 pm
Scott, Thanks for uploading your design. Your results are partly due to true DRC violations, and partly due to a new analysis bug that you have discovered....
1729
marianomruiz
May 22, 2012 10:43 pm
Did you get the QFN 16. I am looking for one now. Thanks...
1730
kwozzzz@...
preston1122
May 23, 2012 12:48 pm
No Sent from my U.S. Cellular® Android-powered device ... From: marianomruiz <marianomruiz@...> To: expresspcb@yahoogroups.com Sent: Tue, May 22, 2012...
1731
kbyrne10
May 23, 2012 10:51 pm
Question for anyone who knows. I have downloaded and installed Marty's sch tool in my ExpressSCH folder. I did what he said with the folders option and opened...
1732
Joel Davidson
jrd_st1100
May 24, 2012 11:46 am
I've not used Marty's program, but typically, the <xx> means the value you enter is required, but you don't need the angle brackets. The [-sn] means -s and -n...
1733
David McQuate
jazzharmonyl...
May 24, 2012 11:49 am
Do not type the less-than or greater-than characters into the command line. Likewise, do not type the square brackets. So, your command should be simply ...
1734
Kevin Byrne
kbyrne10
May 24, 2012 12:31 pm
I understand all of that but: when I type into the command window after this: C:Documents and Settings\ New\ My Documents> What exactly is it that I type in...
1735
Kevin Byrne
kbyrne10
May 24, 2012 12:41 pm
I just tried what this e-mail stated and these are the exact results: Xsch45w-Amp.schBOM-sn No spaces in between and answer to program stated: is not...
1736
Steve
blisscomm
May 24, 2012 3:28 pm
... If you are running Windows, I think you should install Marty's latest XGpcb program (currently version 1.3). It is a GUI program so it's easier to use....
1737
Steve
blisscomm
May 24, 2012 3:45 pm
Sorry I posted. I now see the XGpcb program uses the pcb file for the BOM, not the schematic....
1738
David McQuate
jazzharmonyl...
May 24, 2012 8:33 pm
Kevin, You DO need to put spaces between the items on the command line. They serve to separate one from the next. As far as upper or lower case goes, on...
1739
Kevin Byrne
kbyrne10
May 24, 2012 9:57 pm
Reply to group: All particulars of folders were unzipped and placed on desktop. Then one folder was chosen called Tex. After all other documents plus anything...
1740
martyflickinger
May 25, 2012 5:34 am
I'll be releasing an improved tool very soon (a derivative of XGpcb) that has an improved user interface, new features, and bug fixes. It will produce the BOM...
1741
Kevin Byrne
kbyrne10
May 25, 2012 1:30 pm
Thanks marty for the advise I will look forward to your new tool as the PCB one works great for me. One thought thou could you tell a newbi to command what...
1742
Kevin Byrne
kbyrne10
May 25, 2012 3:17 pm
I am running Windows XP Professional Version With P4 2.8GHZ CPU/ 2GB RAM/ 500GB Hard Drive. Marty's PC tool for ExpressPCB works A/OK. [Non-text portions of...
1743
Dennis Hawkins
n4mwd
May 26, 2012 11:39 am
Thanks Marty!! Dennis....
1744
martyflickinger
May 30, 2012 4:07 pm
I have finished and released version 2.0 of my PCB checking and verification tool for ExpressPCB designs. This is such a radical update, and includes so much...
1745
Brad
brad_levy
Jun 1, 2012 10:57 am
Marty, thanks, a suggestion and a question. First, thanks. xCheck is a very useful tool! I plan to register the copy I downloaded. It is a definite time saver....
1746
johann_ohnesorg
Jun 1, 2012 11:25 am
Marty, can this be compiled so it runs without the .NET enviroment? It makes n o sense to run a 75MB püackage for a 2Mb programm. Cheers, Johann...
1747
martyflickinger
Jun 1, 2012 3:39 pm
Thanks for your compliments. Good suggestion on the statistics. I'll try to have that change made for the next release. Concerning the mounting hole of the...
1748
martyflickinger
Jun 1, 2012 6:23 pm
I wish that was possible, but that's not something natively supported by the .NET framework. There is a third party tool that claims to do this to your...
1749
Tom Becker
b19063
Jun 3, 2012 11:51 pm
FYI, Linux Debian Mint (3.2.0-2-686-pae [multicore]), Wine (1.5.5) and the current ExpressPCB Win installer work fine. Tom...
1750
ChristopherG
cgoodman1980
Jun 8, 2012 11:20 am
Anyone have stereo jacks to share? Looking for the pcb mounted 5 pin and a pcb 3 pin. Thanks Christopher...
1751
Brad
brad_levy
Jun 10, 2012 5:36 am
This is perhaps slightly off topic for this group, but not completely. I've got a space-constrained board on which I need to put some resistor networks. ...
